With many years of experience in the field of optical metrology, we are in the position to find the best solutions for our customers, which are the world market leaders in automotive, bearings, glass, watches, mechanical seals, semiconductors and many more.
Another key driver for WIMEKO is the design of Add-ons to existing equipment for automated part handling or easier setup for the operator.
Don’t hesitate to contact us, we will be happy to present our ideas and solutions.
WIMEKO FM600 PolishcheckMeasurement examples and benefits for ceramic polishing carriers Measurement of empty ceramic carriers: It is important that the carrier is clean from previous waxing processes, further it is important that the Flatness of the carrier is within spec and that it is convex. The tool is capable to measure the pockets that can be seen on the carriers after they were used for several waxing and polishing processes, this gives a clear answer when a carrier should be reworked. |
 |
- Wax left over from previous process Pockets from carrier can be seen on the wafer after polishing.
- Pockets from carrier can be seen on the wafer after polishing.
WIMEKO Cylindermaster II
None contact, full surface, highspeed measurement for cylindricical parts with 1µm tolerance for parallelism, roundness and straightness.
The system is equiped with a cleanroom compartment and a HEPA unit to run in production.
WIMEKO Cleanroom compartment for Metrology product lines.WIMEKO cleanroom compartments, to run Metrology equipment in production. |
 |
WIMEKO FM200 USD setup to measure parts up to 30 kg weight.
Measurement extension for Corning Tropel Flatmaster 200 to measure applications that are larger than the field of view.
Capabilities of WIMEKO Messtechnik e.K. at a Glance:
- Sales and service for Corning Tropel product lines across Europe.
- Fully rebuild of Corning Tropel Cylindermaster and Flatmaster product lines.
- Automated metrology solutions and integration of metrology sensors (all brands).
- Design and manufacturing of cleanroom compartments to run the metrology equipment in production.
- Design and manufacturing of customer specific fixtures.
- Software development and mechanical designs.